Manual deactivation of BackupAssist license keys
If the machine running BackupAssist does not have a connection to the internet, deactivating BackupAssist license keys involves a two-step process: Save an XML activation file to disk and copy this file to a machine with an internet connection. Upload the deactivation file to the BackupAssist website to deactivate the license key(s). Until a key has been deactivated by uploading the deactivation file to the BackupAssist website the key cannot be activated on another machine. Click Home in the navigation bar. Click View licensing information to the middle-right of the window. Click...
Enable the built-in administrator account CMD
Enable the built-in administrator account: a. Go to c:\Windows\System32\. b. Right-click CMD.exe and select Run As Administrator. c. Provide the following in the command prompt: net user administrator /active:yes
How to install the Client/Server Security Agents
1. On Internet Explorer (IE) 5.5 or higher, click Tools > Internet Options > Security tab >Local intranet and set the security level to allow ActiveX controls to download the setup files. Note: IE 64-bit is not supported. You can also use the Security Server’s Web Console. On the password screen, you will see a “Click here” link for client installation. 2. Go to the IE address bar and type one of the following: • If the Security Server has SSL: https://<Trend Micro Security Server...
Run Winpay wthin a local network
\\SERVER\winpay\PAY.EXE MappedDriveLetter:\ Were server is computer name were database resides and MappedDriveLetter is the letter of the mapped share.
Manually Configuring a CISCO SPA500 Series for 3CX Phone System
Important: This guide has been tested with firmware version 7.4.6. Be aware that different firmware revisions may have different web interface formats and functionality. This FAQ is based on a new phone OR one that has been reset to factory defaults. If in doubt, reset the phone to Factory Defaults. To make a “Blind” transfer (where you transfer a call to another extension WITHOUT waiting for the other extension to respond”, you need to use the “bxfer” softkey. To make an “Attended” transfer (where you wait for the second extension to answer before...
How to auto-provision IP phones with DHCP ‘option 66′
After you have created the extension in 3CX PhoneSystem, entered the MAC address of the phone, and specified the model, you will need to configure the phone to retrieve the configuration from the 3CX PhoneSystem provisioning URL. When deploying a large number of IP phones on your network, it is best to use DHCP ‘option 66′ to automatically instruct the phone with the provisioning URL. For the purposes of this FAQ, we will assume that the DHCP Server to be configured is running Microsoft’s DHCP server, and that the IP Address of the 3CX PhoneSystem machine is...
